Upgrade a room on its own
A self-contained system serves the room where it is installed. Consider it for additions and renovations where a room-level solution suits the project.
Contour
Room-by-room heating and cooling, without a separate outdoor unit.
Explore the systemDiscuss your projectHeating and cooling without an outdoor condenser
Contour brings the equipment inside. Its self-contained design connects to outdoor air through two wall openings, with no separate condenser to place on a balcony, roof or at ground level.
For an individual room or a building with repeated room layouts, that means a different way to add comfort when outdoor equipment space is limited.
See capacity and dimensionsPut room comfort in reach
Set the temperature, operating mode and fan speed at the unit or with the remote. Each room can be adjusted to the way it is used.
Handle routine filter care inside
Removable, washable filters are reached from the top of the indoor unit, making regular cleaning part of room-side maintenance.
Controls for everyday use
Choose the mode and airflow for the room, then use the timer and sleep settings to fit your routine.
More than heating and cooling
Cooling, heating, dry, fan and auto modes give you a choice for changing room conditions. Fan-speed and louver controls adjust how the air is delivered.
Set a schedule around the room
On/off timers and sleep mode let you set operation around occupancy and bedtime without returning to the controls each time.
Control from your phone
Wi-Fi connection through the Smart Life app adds remote control alongside the onboard panel and handheld remote.
A wall-thermostat option
External 24 V wall-thermostat operation uses an adapter and a change to the control connection. Confirm the thermostat and adapter arrangement for your installation.
Specifications
Two models for different room loads and electrical supplies
Contour 12K OSDD12D302A
- Model number
- OSDD12D302A
- Power supply
- 208 / 230 V, 60 Hz
- Electric heat
- 10,236 BTU/h
- Airflow
- 330 CFM
- Rated cooling input
- 1,209 W / 6.1 A
- Rated heat-pump input
- 947 W / 4.8 A
- Heating + electric-heat current
- 18.4 A
- Refrigerant / charge
- R32 / 22.9 oz
- Dimensions (W x H x D)
- 39.37 x 22.83 x 8.58 in.
- Unit weight
- 117 lb
- Controls
- Onboard panel, handheld remote and Wi-Fi; external 24 V wall-thermostat operation with adapter and configuration
Heat-pump heating and electric-heat outputs are shown separately. Select equipment using the room load and the electrical and installation requirements of the specific model.
Discuss this Contour modelModel submittals
Technical data, installation details and controls, with a fillable project cover.
Contour 12K · 208 / 230 V
OSDD12D302A
Contour 7K · 115 V
OSDD07D061A
What the installation involves
The unit mounts inside on an exterior wall. The outdoor connection is made through wall openings and grilles, with drainage and electrical supply coordinated at the unit.
What changes on the exterior?
Two air openings and exterior grilles connect the unit to outdoor air. Their positions, weather sealing and required clearances must be coordinated with the wall construction and facade.
What about an existing PTAC opening?
Contour uses a double-duct wall connection. Reusing an existing opening requires a site-specific installation design that addresses the air ducts, mounting, weather sealing and drainage.
What should I send with a project inquiry?
Include the room layout, project location, exterior-wall details and available electrical supply. For repeated rooms, include the room count and any differences in layout or exposure.